Page 1 of 1
switch from GMT to BST
Posted: Tue Mar 21, 2006 2:38 am
by Bawbagg
I'm noticing some funny handling of times over the moment of changeover Sunday morning.
EG, direct checking of the Radio Times .dat file shows Narrow Margin starting at 23.25 and finishing at 02.05 with a duration of 100 mins. This seems to be correct. (There also appears a (GMT) indicator in front of it.)
Now, inspecting the output from 3.03, it seems that:
<programme start="20060325232500 +0000" stop="20060326030500 +0100" channel="37">
<title lang="en">Narrow Margin</title>
XMLTV GUI is adding an EXTRA hour to the time difference. Duration is correctly identified as 100 mins.
I don't think this seems correct (but I have been wrong before!!). Thanks for any comments.
Cheers,
BB
Posted: Tue Mar 21, 2006 10:04 am
by alanbirtles
i must have messed up the code when i copied it over from v2
Posted: Tue Mar 21, 2006 10:59 am
by alanbirtles
no that is correct, 2:05 gmt is 3:05 bst, any time after 2am will be output as bst, the timezone of the output will not necessarily match the timezone of the orignal data
Posted: Tue Mar 21, 2006 9:12 pm
by Bawbagg
errrmmmm.... sorry.... still don't agree...
<programme start="20060325232500 +0000" stop="20060326030500 +0100" channel="37">
<title lang="en">Narrow Margin</title>
<desc lang="en">Taut thriller about a district attorney charged with escorting a key witness to a mob killing from Canada to Los Angeles. When he accidentally gives away her whereabouts to hit men out to silence her, the pair have to make a frantic escape on a train travelling through the Canadian Rockies.</desc>
<credits>
<director>Peter Hyams</director>
<actor>Gene Hackman</actor>
<actor>Anne Archer</actor>
<actor>James B Sikking</actor>
<actor>J T Walsh</actor>
<actor>M Emmet Walsh</actor>
<actor>Susan Hogan</actor>
</credits>
<date>1990</date>
<category lang="en">Film</category>
<length units="minutes">100</length>
<video>
<aspect>16:9</aspect>
</video>
<subtitles type="teletext">
<language lang="en">English</language>
</subtitles>
</programme>
Here's the full excerpt from a programme that spans the time change.
Programme Start = 2325 + 0000
Programme End = 0305 + 0100
Which would make the programme 160mins long. However, duration is (correctly) identified as 100mins. There is an extra 60mins.
Cheers,
BB
Posted: Tue Mar 21, 2006 10:58 pm
by alanbirtles
i can oly use the data that i'm given. in the past if there was gmt or bst in the title then that meant that both times for the program were in that timezone. This time round the data seems to not be correct (it has worked for the past 2 years), I don't think there is much i can do about it. If you look at the radio times website you will see that the xmltv data produced by my program is in comparison quite accurate
. A postprocessor could possibly correct the stop time so that it always mtaches the start time + duration but i dont think its worth it for what only occurs twice a year
Posted: Tue Mar 21, 2006 11:09 pm
by alanbirtles
or i could just change iot so that it ignores the timezone specfiers in the title and works it out for itself as it seems that this year they aren't correct
Posted: Tue Mar 21, 2006 11:12 pm
by alanbirtles
you can use
http://www.birtles.org.uk/xmltv/tz_fix.exe to fix this problem but i'm unsure how well it will work on other channels or in the future
Posted: Tue Mar 21, 2006 11:17 pm
by alanbirtles
actually it does seem to work for most if not all channels